THERM-A-GAP™ GEL 30 Series
Parker Chomerics THERM-A-GAP™ Gel 30 is a single-component, fully cured, dispensable gel with 3.5 W/m-K Thermal Conductivity.
THERM-A-GAP™ TC50 Series
Parker Chomerics THERM-A-GAP™ TC50 is a single-component, fully cured, dispensable putty with 5.0 W/m-K Thermal Conductivity.
THERM-A-GAP™ HCS10 and 579 Series
Parker Chomerics THERM-A-GAP™ 579 Thermally Conductive Gap Filler Pads provide a low hardness (30 Shore 00) solution with 3.0 W/m-K Thermal Conductivity.
About Parker Chomerics
Chomerics Division is part of the Parker Hannifin Corporation Engineered Materials Group, and is a global leader in the development and application of electrically conductive and thermal interface materials. Engineers and designers from every industry including aviation, telecommunications, medical devices, defense, commercial and consumer electronics choose Chomerics for its strong product portfolio, which utilizes technology built on core competencies in material science and process technology. Their goal is to provide quality products, premier customer service, and the tools to keep your critical applications working safely and dependably. With stocking and fabrication capabilities on five continents, their products are available when and where you need them. Expanded production capacity, experienced personnel, and a robust communications/ information infrastructure allow them to respond to increasingly global demand for their products and services.
PARKER CHOMERICS BLOG POSTS
- 7 Most Common EMI Shielding Elastomer Gasket Mounting Choices
- Can Electrical Resistance Be Used to Predict Shielding Effectiveness?
- Electromagnetic Compatibility in Next Gen Autonomous Vehicles
- EMI Shielding Gaskets Spliced Gaskets vs Molded Gaskets
- EMI Shielding Technology Applications in Defense Systems
- EMI Testing for Medical Devices – What You Need to Know
- How to Identify Quality Thermal Gap Fillers in Four Steps
- How to Reduce Galvanic Corrosion Using Conductive Filler Systems
- Pressure Sensitive Adhesives and Elastomer EMI Gaskets: What You Need to Know
- Solving EMI Issues in Mobile Electronic Devices
- Surface Preparation for Painting Conductive Coatings
- The Basics of Microwave Absorber Materials
- The Difference Between Thermal Conductivity and Thermal Impedance
- The Four Best Thermal Interface Materials For Cooling Electronics
- What Are Electromagnetic Interference and Electromagnetic Compatibility Measurements, and Why Do We Care?
- Why You Should Single-Source EMI Shielding Materials
- Automotive Component Manufacturer Requires Heat Dissipation for EV/Hybrid Vehicle DC/DC Converter
- Electronics Component Manufacturer Requires Conductive Grommet for Cable Slot Passthrough
- Electronics Component Manufacturer Requires EMI elastomer Connector Gasket
- Hard Drive Manufacturer Requires Cooling of Two Adjacent Read/Write Chips on Circuit Board
- Powder Coating CHO-BOND 1019