BAT,SBAT54CL Datasheet by ON Semiconductor

| Download PDF Datasheet

0N Semiconductor® www.0nsemi.com

Publication Order Number:

BAT54CLT1/D

November, 2019 − Rev. 12

Schottky Barrier Diodes,

Dual Common Cathode

BAT54CL

These Schottky barrier diodes are designed for high speed switching

applications, circuit protection, and voltage clamping. Extremely low

forward voltage reduces conduction loss. Miniature surface mount

package is excellent for hand−held and portable applications where

space is limited.

Features

•Extremely Fast Switching Speed

•Low Forward Voltage − 0.35 V (Typ) @ IF = 10 mAdc

•S Prefix for Automotive and Other Applications Requiring Unique

Site and Control Change Requirements; AEC−Q101 Qualified and

PPAP Capable

•These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS

Compliant

MAXIMUM RATINGS (TJ = 125°C unless otherwise noted)

Rating Symbol Value Unit

Reverse Voltage VR30 V

Forward Power Dissipation

@ TA = 25°C

Derate above 25°C

PF225

1.8

mW/°C

Thermal Resistance (Note 1)

Junction-to-Ambient (Note 2)

RqJA 508

311

°C/W

Forward Current (DC) IF200 Max mA

Non−Repetitive Peak Forward Current

tp < 10 msec

IFSM 600

Repetitive Peak Forward Current

Pulse Wave = 1 sec,

Duty Cycle = 66%

IFRM 300

Junction Temperature TJ−55 to +150 °C

Storage Temperature Range Tstg −55 to +150 °C

Stresses exceeding those listed in the Maximum Ratings table may damage the

device. If any of these limits are exceeded, device functionality should not be

assumed, damage may occur and reliability may be affected.

1. FR−4 @ Minimum Pad.

2. FR−4 @ 1.0 x 1.0 inch Pad.

30 VOLT

DUAL COMMON CATHODE

SCHOTTKY BARRIER DIODES

CATHODE

ANODE

MARKING DIAGRAM

†For information on tape and reel specifications,

including part orientation and tape sizes, please

refer to our Tape and Reel Packaging Specifications

Brochure, BRD8011/D.

SOT−23

CASE 318

STYLE 9

5C = Device Code

M = Date Code

G= Pb−Free Package

5C MG

*Date Code orientation and/or position may

vary depending upon manufacturing location.

Device Package Shipping†

ORDERING INFORMATION

BAT54CLT1G SOT−23

(Pb−Free)

3,000 /

Tape & Reel

BAT54CLT3G SOT−23

(Pb−Free)

10,000 /

Tape & Reel

SBAT54CLT1G SOT−23

(Pb−Free)

3,000 /

Tape & Reel

(Note: Microdot may be in either location)

www.onsemi.com

www.cnsemi.com

BAT54CL

www.onsemi.com

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (EACH DIODE)

Characteristic Symbol Min Typ Max Unit

Reverse Breakdown Voltage

(IR = 10 mA)

V(BR)R 30 − −

Total Capacitance

(VR = 1.0 V, f = 1.0 MHz)

−7.6 10

Reverse Leakage

(VR = 25 V)

−0.5 2.0

Forward Voltage

(IF = 0.1 mA)

(IF = 1.0 mA)

(IF = 10 mA)

(IF = 30 mA)

(IF = 100 mA)

−

0.22

0.29

0.35

0.41

0.52

0.24

0.32

0.40

0.50

0.80

Reverse Recovery Time

(IF = IR = 10 mAdc, IR(REC) = 1.0 mAdc, Figure 1)

trr

− − 5.0

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

Notes: 1. A 2.0 kW variable resistor adjusted for a Forward Current (IF) of 10 mA.

Notes: 2. Input pulse is adjusted so IR(peak) is equal to 10 mA.

Notes: 3. tp » trr

+10 V 2 k

820 W

0.1 mF

DUT

100 mH

0.1 mF

50 W OUTPUT

PULSE

GENERATOR

50 W INPUT

SAMPLING

OSCILLOSCOPE

trtpT

10%

90%

trr T

iR(REC) = 1 mA

OUTPUT PULSE

(IF = IR = 10 mA; measured

at iR(REC) = 1 mA)

INPUT SIGNAL

Figure 1. Recovery Time Equivalent Test Circuit

BAT54CL

www.onsemi.com

TYPICAL CHARACTERISTICS

, TOTAL CAPACITANCE (pF)

100

0.0 0.1

, FORWARD VOLTAGE (VOLTS)

0.2 0.3 0.4 0.5

1.0

0.1

85°C

VR, REVERSE VOLTAGE (VOLTS)

1.0

0.1

0.01 510

15 20 25

VR, REVERSE VOLTAGE (VOLTS)

051015 30

Figure 2. Forward Voltage

Figure 3. Leakage Current

Figure 4. Total Capacitance

−40°C

25°C

TA = 150°C

TA = 125°C

TA = 85°C

TA = 25°C

0.6

−55°C

150°C

125°C

100

1000

2520

IR, REVERSE CURRENT (mA)

, FORWARD CURRENT (mA)

0N Semiwndudw" w + I—‘7 7‘, * III ‘ ﬁk: i: L if i f E gags A1 /" SOLDERING F0 7 + 7‘ , n 1 I a -L—L ON Semxcunduclar vesewes we th| to make changes wuhum Yunhev name to any prnduns havem ON Semanduc‘m makes m7 wanamy represenlalmn m guarantee regardmg ma sumahmh/ at W; manuals can any pamcu‘av purpase nnv dues ON Semumnduclm assume any Mammy ansmg mac xna apphcahan m use no any pmduclnv mum and saaamcauy dwsc‘axms any and au Mammy mc‘udmg wmnam hmma‘mn spema‘ cansequenha‘ m \nmdenla‘ damages ON Semxmnduclar dues nn| aanyay any hcense under Ms pa|em thls nar xna ngms av n|hers

SOT−23 (TO−236)

CASE 318−08

ISSUE AS

DATE 30 JAN 2018

SCALE 4:1

XXXMG

XXX = Specific Device Code

M = Date Code

G= Pb−Free Package

*This information is generic. Please refer to

device data sheet for actual part marking.

Pb−Free indicator, “G” or microdot “ G”,

may or may not be present.

GENERIC

MARKING DIAGRAM*

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION: MILLIMETERS.

3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH.

MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF

THE BASE MATERIAL.

4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,

PROTRUSIONS, OR GATE BURRS.

SOLDERING FOOTPRINT

VIEW C

0.25

SEE VIEW C

DIM

MIN NOM MAX MIN

MILLIMETERS

0.89 1.00 1.11 0.035

INCHES

A1 0.01 0.06 0.10 0.000

b0.37 0.44 0.50 0.015

c0.08 0.14 0.20 0.003

D2.80 2.90 3.04 0.110

E1.20 1.30 1.40 0.047

e1.78 1.90 2.04 0.070

L0.30 0.43 0.55 0.012

0.039 0.044

0.002 0.004

0.017 0.020

0.006 0.008

0.114 0.120

0.051 0.055

0.075 0.080

0.017 0.022

NOM MAX

STYLE 22:

PIN 1. RETURN

2. OUTPUT

3. INPUT

STYLE 6:

PIN 1. BASE

2. EMITTER

3. COLLECTOR

STYLE 7:

PIN 1. EMITTER

2. BASE

3. COLLECTOR

STYLE 8:

PIN 1. ANODE

2. NO CONNECTION

3. CATHODE

STYLE 9:

PIN 1. ANODE

2. ANODE

3. CATHODE

STYLE 10:

PIN 1. DRAIN

2. SOURCE

3. GATE

STYLE 11:

PIN 1. ANODE

2. CATHODE

3. CATHODE−ANODE

STYLE 12:

PIN 1. CATHODE

2. CATHODE

3. ANODE

STYLE 13:

PIN 1. SOURCE

2. DRAIN

3. GATE

STYLE 14:

PIN 1. CATHODE

2. GATE

3. ANODE

STYLE 15:

PIN 1. GATE

2. CATHODE

3. ANODE

STYLE 16:

PIN 1. ANODE

2. CATHODE

3. CATHODE

STYLE 17:

PIN 1. NO CONNECTION

2. ANODE

3. CATHODE

STYLE 18:

PIN 1. NO CONNECTION

2. CATHODE

3. ANODE

STYLE 19:

PIN 1. CATHODE

2. ANODE

3. CATHODE−ANODE

STYLE 23:

PIN 1. ANODE

2. ANODE

3. CATHODE

STYLE 20:

PIN 1. CATHODE

2. ANODE

3. GATE

STYLE 21:

PIN 1. GATE

2. SOURCE

3. DRAIN

STYLE 1 THRU 5:

CANCELLED

STYLE 24:

PIN 1. GATE

2. DRAIN

3. SOURCE

STYLE 25:

PIN 1. ANODE

2. CATHODE

3. GATE

STYLE 26:

PIN 1. CATHODE

2. ANODE

3. NO CONNECTION

STYLE 27:

PIN 1. CATHODE

2. CATHODE

3. CATHODE

2.10 2.40 2.64 0.083 0.094 0.104

0.35 0.54 0.69 0.014 0.021 0.027

0−−− 10 0 −−− 10

T°°°°

TOP VIEW

SIDE VIEW

END VIEW

2.90

0.80

DIMENSIONS: MILLIMETERS

0.90

PITCH

3X 0.95

RECOMMENDED

STYLE 28:

PIN 1. ANODE

2. ANODE

3. ANODE

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

98ASB42226B

DOCUMENT NUMBER:

DESCRIPTION:

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

PAGE 1 OF 1

SOT−23 (TO−236)

a a e lrademavks av Semxcunduclm Cnmvnnems In "sine \ghlsmanumhernlpalems \rademavks Dav www menu cumrsuerguwaxem Mavkmg gm 9 www nnserm cum

www.onsemi.com

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

TECHNICAL SUPPORT

North American Technical Support:

Voice Mail: 1 800−282−9855 Toll Free USA/Canada

Phone: 011 421 33 790 2910

LITERATURE FULFILLMENT:

Email Requests to: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Europe, Middle East and Africa Technical Support:

Phone: 00421 33 790 2910

For additional information, please contact your local Sales Representative