ABLS,ABM3B,ABM9 Spec for Micrel MICRF Series Datasheet by Abracon LLC

View All Related Products | Download PDF Datasheet
E Micrel Semiconductor MICRF Series RF Transceiver CELL? ABBACEDN UJLALTJON ABRACON Cgstal Sgecification for ABRACON CORPORATION WA a TITLE PREP, DATE ENGR DATE SCALE DRAWING NO, REV. YH 8/27/2012 SR 8/27/2012 None CKD DATE AFP’D DATE PAGE OF m m CF 8/27/2012 1 7
ABRACON CORPORATION
Headquarters
30332 Esperanza, Rancho Santa Margarita
California, The USA.
Tel : 949-546-8000
Fax: 949-546-8001
WARNING: ESD SENSITIVE PRODUCT
TITLE
PREP. DATE ENGR. DATE SCALE REV.
YH 8/27/2012 SR 8/27/2012 None
CKD DATE APP'D DATE PAGE OF
--- --- CP 8/27/2012 1 7
MICRF112
ABRACON Crystal Specification for
Micrel Semiconductor MICRF Series RF Transceiver
ABRACON Crystal Specification for
Micrel Semiconductor MICRF Series RF Transceiver
MICRF112
MICRF112
MICRF505
ABLS-9.84375MHz-10-R20-D
ABLS-9.7941MHz-10-R20
ABM3B-12.1875MHz-10-D4 MICRF112
MICRF009-010
ABLS-14.3359MHz-20-R50 MICRF505
ABM9-16.000MHz-10-D-1-U MICRF505-509
$-------
ABLS-13.6050MHz-20-R50-D
For use with Micrel Chip P/N
MICRF011-002-007
MICRF102
ABLS-12.1875MHz-10-R20
MICRF009-010
MICRF009-010
DRAWING NO.
ABRACON P/N for MICRF Chip
ABLS-6.7458MHz-20-R60-D
ABLS-13.560MHz-10-R20-D
ABLS-4.897MHz-20-R70-D MICRF011-002-007
MICRF102
ABLS-13.94916MHz-10-R20
ABLS-13.94916MHz-10-R20-D
ABLS-13.0625MHz-10-R20
ABM3B-13.0625MHz-10-D4
ABRACON
CORPORATION
The Power Of Linking Together
PROPRIETARY NOTICE
These documents, and the contained information herein,
are proprietary and are not to be reproduced, used or
disclosed to others for manufacture or for any other
purpose, except as specifically authorized, in writing, by
ABRACON Corporation.
mmon Specifications
Drawing No. : ------- Rev. - Page 2 of 7
1.0 SCOPE
This specification describes specifications of ABRACON's crystals for Micrel Semiconductor's IC's.
2.0 ELECTRICAL SPECIFICATION
S
2.1 Individual Specifications
Operating Storage Frequency Temperature
Temp. (ÛC) Temp. (ÛC) Tolerance (ppm) Stability (ppm)
6.74580 20 -40 to +85 -40 to +85 60 ±50 ±50
13.56000 10 -40 to +85 -40 to +85 20 ±50 ±50
4.89700 20 -40 to +85 -40 to +85 70 ±50 ±50
9.84375 10 -40 to +85 -40 to +85 20 ±50 ±50
9.79410 10 0 to +70 -40 to +85 20 ±50 ±50
13.94916 10 0 to +70 -40 to +85 20 ±50 ±50
12.18750 10 0 to +70 -40 to +85 20 ±50 ±50
13.06250 10 0 to +70 -40 to +85 20 ±50 ±50
13.60500 20 -40 to +85 -40 to +85 50 ±50 ±50
13.94916 10 -40 to +85 -40 to +85 20 ±50 ±50
14.33590 20 0 to +70 -40 to +85 50 ±50 ±50
16.00000 10 -40 to +85 -40 to +105 80 ±10 ±20
12.18750 10 -40 to +85 -40 to +85 70 ±30 ±50
13.06250 10 -40 to +85 -40 to +85 70 ±30 ±50
2.2 Common Specifications
Shunt capacitance C0: 7 pF max.
Operation mode: AT-cut Fundamantal
Drive level: 1 mW max., 100μW Typical (ABLS)
100 uW max., 10μW Typical (AM9 and
Aging @ 25° C per a year : ± 5 ppm max.
Insulation resistance: 500 Mmin. at 100Vdc ± 15V
Spurious responses: -3dB max.
3.0 SPECIAL REQUIREMENT
This product is RoHS compliant and Pb free.
ABLS-9.84375MHz-10-R20-D
ESR
(ohms)
ABRACON P/N
ABM3B-12.1875MHz-10-D4
ABM3B-13.0625MHz-10-D4
ABM9-16.000Mhz-10-D-1-U
ABLS-13.94916MHz-10-R20-D
ABLS-14.3359MHz-20-R50
ABLS-13.6050MHz-20-R50-D
ABLS-9.7941MHz-10-R20
ABLS-13.94916MHz-10-R20
ABLS-12.1875MHz-10-R20
ABLS-6.7458MHz-20-R60-D
ABLS-13.560MHz-10-R20-D
ABLS-13.0625MHz-10-R20
Load
Cap. (pF)
Frequency
(MHz)
ABLS-4.897MHz-20-R70-D
ABRACON
CORPORATION
The Power Of Linking Together
Note: Over temperature specification for Part# ABM9-16.000MHz-10-D-1-U revised from ±10 ppm to ±20 ppm (-40ºC to +85ºC) on 08/27/2012.
“4:;1g;;:1 :2 ADDDZYX ;; 4.2 ABM9 Series 4.3 ABMSB Series 4.2.1 Marking Method : Laser Marking Daie Code Month January February March April May June July August September October November December
Drawing No. : ------- Rev. - Page 3 of 7
4.0 MARKING
Marking Method : Laser Marking
4.1 ABLS Series Frequency (MHz)
ex. 160 for 16.00 MHz
Traceability Code (Internal)
Year : e.g. 7 for 2007 (See table below)
Month : A to L (See table below)
4.2 ABM9 Series
Frequency (MHz)
ex. 080 for 8.00 MHz
Traceability Code (Internal)
Year : e.g. 7 for 2007 (See table below)
Month : A to L (See table below)
ABRACON's "A"
4.3 ABM3B Series
Frequency (MHz)
ex. 13.062 for 13.0625 MHz
Traceability Code (Internal)
Year : e.g. 7 for 2007 (See table below)
Month : A to L (See table below)
ABRACON's "A"
4.2.1 Marking Method : Laser Marking
Date Code
L
I
October J
November K
F
July G
August H
C
April D
May E
B
Month Code
January A
March
June
September
December
February
A ZYX
ABRACON
CORPORATION
The Power Of Linking Together
XXX
A ZYX
XX.XXX
A ZYX
(. am 1) Emma A o m m T a mu enema. (a m z/ru n }“:‘3§+¢ Recommended 1m puHern " ‘ EC?“ k—H‘é ‘ ‘ ‘L aam infiir ‘ L am 1795; 2% mm mu [9 a) (U) m m M (2.5m) R-mmmINA-d m4 pamm a mum >-—‘(AUtC 2: H muss scrum wzw my WW 0 Hum (34mm) 0 20: am 5 “a O norm vmw rur vxzw 551” We 2 a an 0 am nos 7 2 2k ‘ ‘ 2 A s Homm wzw rov vvrw D‘mens‘cn 1 mm TOLERANCES: UNLESS OTHERW‘SE SPECIFIED. X: 1 01 (0.25) .XX: : 0,01 (0 025) .XXX: : 0.005 (0 (J13)
Drawing No. : ------- Rev. - Page 4 of 7
5.0 OUTLINE DIMENSIONS
5.1 ABLS Series
5.2 ABM9 Series
5.3 ABM3B Series
Note: Due to the availability of raw materials,
this part may be manufactured with the chamfer
on pin 4. Be advised that this does not affect
the electrical characteristics of the crystal in
any way.
.X: ± 0.1 (0.25) .XX: ± 0.01 (0.025) .XXX: ± 0.005 (0.013)UNLESS OTHERWISE SPECIFIED:
TOLERANCES:
Dimension : mm
Chamfer on PIN 1
(Default)
Chamfer on PIN 4
(See note)
ABRACON
CORPORATION
The Power Of Linking Together
ST (tSDp The component snail remain Within the eiectncal specification after loaded viblallon at 10H11055Hzi ampiitiidet 5mm Within 1 minute The component snail remain Within the eiectncal specifications afiei The component snail remain wnnin ine eieciricai specifications aflev being kept at a condition of ambientlemperalure +55%; 55% RH Var Solderahility oi terminals shaii be kept at more than 95% after dipped Temperature tos max t iirne oi +260'C15‘C Pre—Heui Renew Coci Time (seccnds)
Drawing No. : ------- Rev. - Page 5 of 7
6.0 RELIABILITY TES
T
6.1 REFLOW PROFILE
Temperature Cycling:
The component shall remain within the electrical specification
(
± 5 pp
max) after 3 cycles of high and low temperature testing (-40°C to
+85°C) for 2 hours max.
1
Lead Bend:
(ABLS only)
2 Thermal Shock:
4
6
The component shall remain within the electrical specifications after
being kept at a condition of ambient temperature +85°C, 85% RH for
96 hours minimum.
The component shall remain within the electrical specification after
loaded vibration at 10Hz to 55Hz, amplitude 1.5mm, within 1 minute
for 2 hours minimum on each axis (X,Y,Z).
5 Humidity:
The component shall remain within the electrical specifications after a
natural drop (3X) on a hard wooden board at 75 cm.
8Solderability: Solderability of terminals shall be kept at more than 95% after dipped
in solder flux at 260°C ± 5°C for 5 seconds.
Submerge samples in 100% De-ionized water or Perfluorocarbon at
85°C for at least 1 minute. Check for bubbles.
Gross Leak Test:
The component shall withstand maximum bend of 90°C
reference to base for 2 bends. Solder tinning must be
4 microns thick minimum.
No.
3Vibration:
9
The component shall remain within the electrical specification after
exposure at extreme temperature -40°C to +85°C for 5 minutes for 3
cycles.
Fine Leak Test: Expose samples to 60PSIG Helium gas for 2 hours.
Max leak rate 2X10-8atmcc/s.
7
Drop Test:
Test Items Test Conditions
ABRACON
CORPORATION
The Power Of Linking Together
D‘mens‘cn , mm mm (my, mtcnw 2 am mm nmosqp 1 m5 firms mm) Diricwlux 2 m ‘ ‘ mu ‘- TOLERANCES: UNLESS OTHERW‘SE SPECIFIED X1025 .XX, 10,025 .XXX: :0.013
Drawing No. : ------- Rev. - Page 6 of 7
7.0 PACKING
7.1 ABLS Series
T= tape and reel (1,000pcs/reel)
7.2 ABM9 Series
T= tape and reel (1,000pcs/reel)
7.3 ABM3B Series
T= tape and reel (1,000pcs/reel)
.X: ± 0.25 .XX: ± 0.025 .XXX: ± 0.013UNLESS OTHERWISE SPECIFIED:
Dimension : mm
TOLERANCES:
ABRACON
CORPORATION
The Power Of Linking Together
Drawing No. : ------- Rev. - Page 7 of 7
8.0 NOTE
(1) The parts are manufactured in accordance with this specification. If other conditions and
specifications which are required for this specification, please contact ABRACON for more
information.
(2) ABRACON will supply the parts in accordance with this specification unless we receive
a written request to modify prior to an order placement.
(3) In no case shall ABRACON be liable for any product failure from in appropriate handling or
operation of the item beyond the scope of this specification.
(4) When changing your production process, please notify ABRACON immediately.
(5) If you intend to use the product for listed application which may possibly cause to loss of
life or assets, please notify ABRACON in advance.
(For example, Medical, Aerospace, Aeronautic equipment, Safety control equipment
as well as safety related.)
(6) All specifications and Marking will be subject to change without notice.
(7) See ABRACON website (www.abracon.com) for additional Terms and Conditions.
ABRACON
CORPORATION
The Power Of Linking Together

Products related to this Datasheet

CRYSTAL 8.0000MHZ 18PF SMD
CRYSTAL 4.0000MHZ 18PF SMD
CRYSTAL 20.0000MHZ 18PF SMD
CRYSTAL 25.0000MHZ 18PF SMD
CRYSTAL 16.0000MHZ 18PF SMD
CRYSTAL 12.8000MHZ 15PF SMD
CRYSTAL 16.0000MHZ 10PF SMD
CRYSTAL 24.0000MHZ 18PF SMD
CRYSTAL 8.0000MHZ 10PF SMD
CRYSTAL 16.0000MHZ 18PF SMD
CRYSTAL 12.0000MHZ 18PF SMD
CRYSTAL 8.0000MHZ 10PF SMD
CRYSTAL 10.0000MHZ 18PF SMD
CRYSTAL 12.0000MHZ 18PF SMD
CRYSTAL 12.0000MHZ 18PF SMD
CRYSTAL 27.1200MHZ 10PF SMD
CRYSTAL 4.9152MHZ 18PF SMD
CRYSTAL 10.0000MHZ 10PF SMD
CRYSTAL 18.4320MHZ 18PF SMD
CRYSTAL 20.0000MHZ 10PF SMD
CRYSTAL 10.0000MHZ 18PF SMD
CRYSTAL 12.0000MHZ 12PF SMD
CRYSTAL 16.0000MHZ 18PF SMD
CRYSTAL 4.0000MHZ 18PF SMD
CRYSTAL 4.0000MHZ 18PF SMD
CRYSTAL 27.0000MHZ 18PF SMD
CRYSTAL 13.5600MHZ 10PF SMD
CRYSTAL 13.5600MHZ 10PF SMD
CRYSTAL 16.0000MHZ 10PF SMD
CRYSTAL 25.0000MHZ 18PF SMD