APT3216SURCK Datasheet by Kingbright

View All Related Products | Download PDF Datasheet
Kl'ngbrl'ght damage the LEDs - It is recommended to use a wrist band or anti»electrostatic glove when handling the LEDs - All devices, equipments and machineries must be electrically grounded FEATURES - 3.2 mm x 1.6 mm SMD LED, 0.75 mm thickness - Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs I reel Moisture sensitivity level: 3 RoHS compliant APPLICATIONS . Backlight - Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION ‘ Observe precautions for handling ‘ ‘ electrostatic discharge sensitive devices Palavitymavk If 14‘ 16mm ,4}, L ml ,126I 2(00791 Mums) Q I 70.7mm) 0.2mm) aslaoz) Al I” I / ‘ X RECOMMENDED soLDERIN (arms mmitolevance :DII V 15 L 1.75 1.0 175 Notes 1 All WWW: 17cm minimum: rm 2 To/nmnmlxefl 210 ml un/csxom a mspmmm: mamclcnxlmsa mam Without yrmrmzlm: 4 m dawn has: slug/c mouans \V SELECTION GUIDE Pan Number 51:33:33” Lens Type APTSZIESURCK l Hyper Red IAIGaInP) Water Clear um 1 94/2 rs m angle from 09%;! mum: wlicm m luminous Warmly I: 1/2 oflhc upmi um valuc 2 LuminousInrclmly/Iumiuous Ilux ./ 15% ‘ Luminous musuu um rs memoir: :42 cismzoaz sundzrds 19' .955 mammal.Wigwam sum usmanaa/rzuaumnw Mu vuA um mum
© 2019 Kingbright. All Rights Reserved. Spec No: DSAD0989 / 1203001979 Rev No: V.13A Date: 04/09/2019 Page 1 / 4
DESCRIPTIONS
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
3.2 mm x 1.6 mm SMD LED, 0.75 mm thickness
Low power consumption
Wide viewing angle
Ideal for backlight and indicator
Package: 2000 pcs / reel
Moisture sensitivity level: 3
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
SELECTION GUIDE
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
APT3216SURCK
3.2 mm x 1.6 mm SMD Chip LED Lamp
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Part Number Emitting Color
(Material) Lens Type
Iv (mcd) @ 20mA [2] Viewing Angle [1]
Min. Typ. 2θ1/2
APT3216SURCK Hyper Red (AlGaInP) Water Clear
120 230
*40 *80
140°
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Kl'ngbrl'ght
© 2019 Kingbright. All Rights Reserved. Spec No: DSAD0989 / 1203001979 Rev No: V.13A Date: 04/09/2019 Page 2 / 4
ABSOLUTE MAXIMUM RATINGS at TA=25°C
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
APT3216SURCK
Parameter Symbol Emitting Color
Value
Unit
Typ. Max.
Wavelength at Peak Emission IF = 20mA λpeak Hyper Red 645 - nm
Dominant Wavelength IF = 20mA λdom [1] Hyper Red 630 - nm
Spectral Bandwidth at 50% Φ REL MAX
IF = 20mA Δλ Hyper Red 28 - nm
Capacitance C Hyper Red 35 - pF
Forward Voltage IF = 20mA VF [2] Hyper Red 1.95 2.5 V
Reverse Current (VR = 5V) IR Hyper Red - 10 µA
Temperature Coefficient of λpeak
IF = 20mA, -10°C T 85°C TCλpeak Hyper Red 0.14 - nm/°C
Temperature Coefficient of λdom
IF = 20mA, -10°C T 85°C TCλdom Hyper Red 0.05 - nm/°C
Temperature Coefficient of VF
IF = 20mA, -10°C T 85°C TCV Hyper Red -1.8 - mV/°C
Parameter Symbol Value Unit
Power Dissipation PD 75 mW
Reverse Voltage VR 5 V
Junction Temperature Tj 115 °C
Operating Temperature Top -40 to +85 °C
Storage Temperature Tstg -40 to +85 °C
DC Forward Current IF 30 mA
Peak Forward Current IFM [1] 185 mA
Electrostatic Discharge Threshold (HBM) - 3000 V
Thermal Resistance (Junction / Ambient) Rth JA [2] 580 °C/W
Thermal Resistance (Junction / Solder point) Rth JS [2] 375 °C/W
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Rth
JA ,Rth
JS Results from mounting on PC board FR4 (pad size 16 mm2 per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
Kl'ngbrl'ght Red 410.] TAPE 115:0.1 23°“ 4:01 Mum g.12:0.1 zoo . H (-6) above 255 1 0M” 250 A 1‘ 3"(/:max, 1 (/smax, W 356101 2007 , ‘50 g m warheatlng E WSUNZOOBK above 217T r» 60-1205 60" W505 so 25w ”#13 n ‘ ‘ ‘ ‘ ‘ u Sn mm ‘50 mm 250 sun (set) 7 Y 1mg. Mo L 3 4K 910.1 (23
© 2019 Kingbright. All Rights Reserved. Spec No: DSAD0989 / 1203001979 Rev No: V.13A Date: 04/09/2019 Page 3 / 4
0%
20%
40%
60%
80%
100%
350 400 450 500 550 600 650 700 750 800
T
a
= 25 °C
Red
Wavelength (nm)
Relative Intensity (a. u.)
0.5 0.5
90°
15°
30°
45°
60°
75°
-15°
-30°
-45°
-60°
-75°
-90°
0.01.0 1.0
T
a
= 25 °C
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH
HYPER RED
TAPE SPECIFICATIONS (units : mm)
REEL DIMENSION (units : mm)
REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS
SPATIAL DISTRIBUTION
APT3216SURCK
0
10
20
30
40
50
1.5 1.7 1.9 2.1 2.3 2.5
T
a
= 25 °C
Forward voltage (V)
Forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
0 1020304050
T
a
= 25 °C
Forward current (mA)
Luminous intensity normalised
at 20 mA
0
10
20
30
40
50
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Permissible forward current
(mA)
0.0
0.5
1.0
1.5
2.0
2.5
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous intensity normalised
at T
a
= 25 °C
Forward Current vs.
Forward Voltage
Luminous Intensity vs.
Forward Current
Forward Current Derating Curve Luminous Intensity vs.
Ambient Temperature
Notes:
1. Don't cause stress to the LEDs while it is exposed to high temperature.
2. The maximum number of reflow soldering passes is 2 times.
3. Reflow soldering is recommended. Other soldering methods are not recommended as they might
cause damage to the product.
Kl'ngbrl'ght UseI DIIenion ofFeed Label \ OuIsIde EEE" _> ED _> I’m-M." _> LUUOPG / ReeI xxxxxxxxxx Kl'ngbrl'ghlm am “am WW wfi ”E‘MEW m xxxxxxxxxxxxxx Ifi’II‘IIi‘I'I‘Ifif‘W I‘I‘ITIT °“ % (ITIiIIiIII ‘ W‘ IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII (avIXX © 1 Reel/Bag 3am Box make sure we puma IS hemg opelaled w sponsIhIe In: any subsequem Issues names applicauuns II customer's applies m repvesemahve my Nflher assistance ransmmed wIIhom pennIssIon by nghngm mm; //W KIngbngMUSA cum/AgghcahonNoles W/ Kingbrl'ght écK/an Outside ’ Labe‘
© 2019 Kingbright. All Rights Reserved. Spec No: DSAD0989 / 1203001979 Rev No: V.13A Date: 04/09/2019 Page 4 / 4
PACKING & LABEL SPECIFICATIONS
APT3216SURCK
PRECAUTIONARY NOTES
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to
the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If
customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening
liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes

Products related to this Datasheet

LED RED CLEAR CHIP SMD
LED RED CLEAR CHIP SMD
LED RED CLEAR CHIP SMD