EUR | USD

FBMH1608HM102-T Spec Sheet

Taiyo Yuden

View All Related Products | Download PDF Datasheet

Datasheet

Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
Product information in this catalog is as of October 2018. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and medical equipment classified as Class I or II by IMDRF. Please be
sure to contact TAIYO YUDEN for further information before using the products for any equipment which may
directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information
network equipment including, without limitation, telephone exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter TAIYO YUDENs official sales channel ). Please note that the contents of this
catalog are not applicable to our products purchased from any seller other than TAIYO YUDENs official sales
channel.
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to U.S. Export
Administration Regulations , Foreign Exchange and Foreign Trade Control Law of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.

chipbeads_e-E07R01
CHIP BEAD INDUCTORS FOR POWER LINES FB SERIES M TYPE
WAVE
REFLOW
PARTS NUMBER *Operating Temp. : -40~+125℃(Including self-generated heat)
F B M J 3 2 1 6 H S 8 0 0 T △=Blank space
①Series name
Code Series name
FB Ferrite bead
②Shape
Code Shape
M Rectangular chip
③Characteristics
Code Characteristics
J Standard
H High Impedance type
④Dimensions(L×W)
Code Type(inch) Dimensions
(L×W)[mm]
1608 1608(0603) 1.6×0.8
2125 2125(0805) 2.0×1.25
2012 2012(0805)
2016 2016(0806) 2.0×1.6
3216 3216(1206) 3.2×1.6
3225 3225(1210) 3.2×2.5
4516 4516(1806) 4.5×1.6
4525 4525(1810) 4.5×2.5
4532 4532(1812) 4.5×3.2
⑤Material
Code Material
HS Refer to impedance curves
for material differences
HM
HL
⑥Nominal impedance
Code
(example) Nominal impedance[Ω
330 33
221 220
102 1000
⑦Impedance tolerance
Code Impedance tolerance
±25%
N ±30%
⑧Packaging
Code Packaging
T Taping
⑨Internal code
Code Internal code
Standard
STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
W
L
e
T
Recommended Land Patterns
Surface Mounting
・Mounting and soldering conditions should be
checked beforehand.
AAB
C
Type A B C
FB MJ1608 1.0 1.0 1.0
FB MJ2125 1.4 1.2 1.65
FB MJ3216 1.4 2.2 2.0
FB MJ4516 1.75 3.5 2.0
FB MH1608 1.0 1.0 1.0
FB MH2012 1.4 1.2 1.65
FB MH2016 1.4 1.2 2.0
FB MH3216 1.4 2.2 2.0
FB MH3225 1.4 2.2 2.9
FB MH4516 1.75 3.5 2.0
FB MH4525 1.75 3.5 2.9
FB MH4532 1.75 3.5 3.7
Unit:mm
Type L W T e Standard quantity [pcs]
Paper tape Embossed tape
FB MJ1608
(0603)
1.6±0.2
(0.063±0.008)
0.8±0.2
(0.031±0.008)
0.8±0.2
(0.031±0.008)
0.3±0.2
(0.012±0.008) 4000
FB MJ2125
(0805)
2.0±0.2
(0.079±0.008)
1.25±0.2
(0.049±0.008)
0.85±0.2
(0.033±0.008)
0.5±0.3
(0.020±0.012) 4000
FB MJ3216
(1206)
3.2±0.3
(0.126±0.012)
1.6±0.2
(0.063±0.008)
1.1±0.2
(0.043±0.008)
0.5±0.3
(0.020±0.012) 2000
FB MJ4516
(1806)
4.5±0.3
(0.177±0.012)
1.6±0.2
(0.063±0.008)
1.1±0.2
(0.043±0.008)
0.5±0.3
(0.020±0.012) 2000
FB MH1608
(0603)
1.6±0.1
(0.063±0.004)
0.8±0.1
(0.031±0.004)
0.8±0.1
(0.031±0.004)
0.3±0.15
(0.012±0.006) 4000
FB MH2012
(0805)
2.0±0.2
(0.079±0.008)
1.25±0.2
(0.049±0.008)
0.85±0.2
(0.033±0.008)
0.5±0.3
(0.020±0.012) 4000
FB MH2016
(0806)
2.0±0.2
(0.079±0.008)
1.6±0.2
(0.063±0.008)
1.6±0.2
(0.063±0.008)
0.5±0.3
(0.020±0.012) 2000
FB MH3216
(1206)
3.2±0.3
(0.126±0.012)
1.6±0.2
(0.063±0.008)
1.6±0.2
(0.063±0.008)
0.5±0.3
(0.020±0.012) 2000
FB MH3225
(1210)
3.2±0.3
(0.126±0.012)
2.5±0.3
(0.098±0.012)
2.5±0.3
(0.098±0.012)
0.5±0.3
(0.020±0.012) 1000
FB MH4516
(1806)
4.5±0.3
(0.177±0.012)
1.6±0.2
(0.063±0.008)
1.6±0.2
(0.063±0.008)
0.5±0.3
(0.020±0.012) 2000
FB MH4525
(1810)
4.5±0.4
(0.177±0.016)
2.5±0.3
(0.098±0.012)
2.5±0.3
(0.098±0.012)
0.9±0.6
(0.035±0.024) 1000
FB MH4532
(1812)
4.5±0.4
(0.177±0.016)
3.2±0.3
(0.126±0.012)
3.2±0.3
(0.126±0.012)
0.9±0.6
(0.035±0.024) 2000
Unit:mm(inch)
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
REFLOWWAVE
132

PARTS NUMBER
Standard type
FB MJ1608
FB MJ1608HS280NT RoHS 0.007 4.0 0.8 ±0.2
FB MJ1608HM230NT RoHS 0.007 4.0 0.8 ±0.2
FB MJ2125
FB MJ2125HS250NT RoHS 0.004 6.0 0.85 ±0.2
FB MJ2125HS420-T RoHS 0.008 4.0 0.85 ±0.2
FB MJ2125HM210NT RoHS 0.004 6.0 0.85 ±0.2
FB MJ2125HM330-T RoHS 0.008 4.0 0.85 ±0.2
FB MJ2125HL8R0NT RoHS 0.008 4.0 0.85 ±0.2
FB MJ3216
FB MJ3216HS480NT RoHS 0.005 6.0 1.1 ±0.2
FB MJ3216HS800-T RoHS 0.010 4.0 1.1 ±0.2
FB MJ3216HM380NT RoHS 0.005 6.0 1.1 ±0.2
FB MJ3216HM600-T RoHS 0.010 4.0 1.1 ±0.2
FB MJ3216HL160NT RoHS 0.012 4.0 1.1 ±0.2
FB MJ4516
FB MJ4516HS720NT RoHS 0.007 6.0 1.1 ±0.2
FB MJ4516HS111-T RoHS 0.014 4.0 1.1 ±0.2
FB MJ4516HM560NT RoHS 0.007 6.0 1.1 ±0.2
FB MJ4516HM900-T RoHS 0.014 4.0 1.1 ±0.2
FB MJ4516HL230NT RoHS 0.014 3.5 1.1 ±0.2
High impedance type GHz Band
FB MH1608
tolerance tolerance
FB MH1608HM470-T RoHS ±25% ±40% 0.020 3.5 0.8 ±0.1
FB MH1608HM600-T RoHS ±25% ±40% 0.025 3.0 0.8 ±0.1
FB MH1608HM101-T RoHS ±25% ±40% 0.035 2.5 0.8 ±0.1
FB MH1608HM151-T RoHS ±25% ±40% 0.050 2.1 0.8 ±0.1
FB MH1608HM221-T RoHS ±25% ±40% 0.070 1.8 0.8 ±0.1
FB MH1608HM331-T RoHS ±25% ±40% 0.130 1.2 0.8 ±0.1
FB MH1608HM471-T RoHS ±25% ±40% 0.150 1.0 0.8 ±0.1
FB MH1608HM601-T RoHS ±25% ±40% 0.170 0.9 0.8 ±0.1
FB MH1608HM102-T RoHS ±25% ±40% 0.350 0.6 0.8 ±0.1
FB MH1608HL300-T RoHS ±25% ±40% 0.028 2.6 0.8 ±0.1
FB MH1608HL600-T RoHS ±25% ±40% 0.045 2.1 0.8 ±0.1
FB MH1608HL121-T RoHS ±25% ±40% 0.130 1.2 0.8 ±0.1
FB MH1608HL221-T RoHS ±25% ±40% 0.170 0.9 0.8 ±0.1
FB MH1608HL331-T RoHS ±25% ±40% 0.210 0.8 0.8 ±0.1
FB MH1608HL471-T RoHS ±25% ±40% 0.350 0.6 0.8 ±0.1
FB MH1608HL601-T RoHS ±25% ±40% 0.450 0.5 0.8 ±0.1
High impedance type
FB MH2012
FB MH2012HM800-T RoHS 0.025 2.7 0.85 ±0.2
FB MH2012HM121-T RoHS 0.032 2.5 0.85 ±0.2
FB MH2012HM221-T RoHS 0.060 2.0 0.85 ±0.2
FB MH2012HM331-T RoHS 0.080 1.8 0.85 ±0.2
FB MH2016
FB MH2016HM121NT RoHS 0.015 4.5 1.6 ±0.2
FB MH2016HM251NT RoHS 0.050 2.0 1.6 ±0.2
FB MH3216
FB MH3216HM221NT RoHS 0.020 4.0 1.6 ±0.2
FB MH3216HM501NT RoHS 0.070 2.0 1.6 ±0.2
FB MH3225
FB MH3225HM601NT RoHS 0.042 3.0 2.5 ±0.3
FB MH3225HM102NT RoHS 0.100 2.0 2.5 ±0.3
FB MH3225HM202NT RoHS 0.130 1.2 2.5 ±0.3
±30%
Impedance tolerance
±30%
±25%
120
250
±30%
±25%
25
42 ±25%
±30%
±30%
EHS
100
Rated current
[A](max.)
Thickness
[mm]
Rated current
[A](max.)
Thickness
[mm]
DC Resistance
[Ω](max.)
DC Resistance
[Ω](max.)
DC Resistance
[Ω](max.)
Parts number EHS
Parts number EHS
±30%
±30%
Impedance tolerance
Impedance tolerance
23
Nominal impedance
(Ω)
Rated current
[A](max.)
Thickness
[mm]
Parts number EHS DC Resistance
[Ω](max.)
Rated current
[A](max.)
Thickness
[mm]
Parts number
38
60
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Thickness
[mm]
DC Resistance
[Ω](max.)
Nominal impedance
Measuring frequency 1[GHz]
370
520
220
540
950
60
100
150
220
Rated current
[A](max.)
Thickness
[mm]
330
470
600
1000
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Thickness
[mm]
Parts number EHS
Parts number EHS
Parts number EHS
Nominal impedance
Measuring frequency 100[MHz
Rated current
[A](max.)
Thickness
[mm]
Parts number EHS DC Resistance
[Ω](max.)
Nominal impedance
(Ω) Impedance tolerance
Rated current
[A](max.)
Thickness
[mm]
DC Resistance
[Ω](max.)
100
1001000
Parts number EHS
72
110
56
30
60
120
220
Nominal impedance
(Ω)
Nominal impedance
(Ω)
Nominal impedance
(Ω) Impedance tolerance
±30%
±25%
±30%
21
±30%
80
16
±25%
±30%
±30%
±25%
±30%
750
900
33
8
28
(Ω)
47
90
23
48
Measuring frequency
[MHz]
Measuring frequency
[MHz]
Measuring frequency
[MHz]
Measuring frequency
[MHz]
100
330
(Ω)
75
100
170
100
Measuring frequency
[MHz]
Measuring frequency
[MHz]
Measuring frequency
[MHz]
Measuring frequency
[MHz]
100
100
100
100
1200
100
100
100
100
100
100
100
100
100
120
1200
1500
1800
100
100
100
80
120 ±25%
100
470
600
270
330
Nominal impedance
(Ω)
100
100
100
100
100
Impedance tolerance
±25%
100
Impedance tolerance
Nominal impedance
(Ω)
220
2000
220
500
Nominal impedance
(Ω) Impedance tolerance
600 ±30%
±30%
±30%
±25%
±25%
±30%
±30%
chipbeads_e-E07R01
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
133
PARTS NUMBER
FB MH4516
FB MH4516HM851NT RoHS 0.100 1.5 1.6 ±0.2
FB MH4525
FB MH4525HM102NT RoHS 0.060 3.0 2.5 ±0.3
FB MH4525HM162NT RoHS 0.130 2.0 2.5 ±0.3
FB MH4532
FB MH4532HM681-T RoHS 0.028 4.0 3.2 ±0.3
FB MH4532HM132-T RoHS 0.060 3.0 3.2 ±0.3
FB MH4532HM202-T RoHS 0.130 1.3 3.2 ±0.3
High current type
FB MJ1608HS220NTR RoHS 0.004 7.5 0.8 ±0.2
FB MJ1608HS280NTR RoHS 0.006 6.0 0.8 ±0.2
FB MJ1608HM180NTR RoHS 0.004 7.5 0.8 ±0.2
FB MJ1608HM230NTR RoHS 0.006 6.0 0.8 ±0.2
22
28
Parts number EHS DC Resistance
[Ω](max.)
Rated current
[A](max.)
Thickness
[mm]
EHS DC Resistance
[Ω](max.)
Rated current
[A](max.)
Thickness
[mm]
Rated current
[A](max.)
Thickness
[mm]
Parts number EHS DC Resistance
[Ω](max.)
Rated current
[A](max.)
Thickness
[mm]
DC Resistance
[Ω](max.)
Parts number EHS
Parts number Measuring frequency
[MHz]
Measuring frequency
[MHz]
100
Measuring frequency
[MHz]
100
100
100
100
100
100
100
Measuring frequency
[MHz]
100
100
23
680
1300
2000
1000
1600
18
Nominal impedance
(Ω)
Nominal impedance
(Ω)
Nominal impedance
(Ω)
Nominal impedance
(Ω)
850 ±30%
Impedance tolerance
±30%
Impedance tolerance
±30%
±30%
Impedance tolerance
±30%
±30%
±25%
±25%
±25%
Impedance tolerance
±30%
chipbeads_e-E07R01
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
134
ELECTRICAL CHARACTERISTICS
Standard type
FB MJ1608 FB MJ2125
FB MJ3216
FB MJ4516
0
10
20
30
40
50
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HM230NT
Z
X
R
0
5
10
15
20
25
30
35
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HS280NT
Z
X
R
0
10
20
30
40
50
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ2125HL8R0NT
Z
X
R
0
10
20
30
40
50
60
70
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ2125HM330-T
Z
X
R
0
10
20
30
40
50
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ2125HM210NT
Z
X
R
0
5
10
15
20
25
30
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ2125HS250NT
Z
X
R
0
10
20
30
40
50
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ2125HS420-T
Z
X
R
0
20
40
60
80
100
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ3216HL160NT
Z
X
R
0
10
20
30
40
50
60
70
80
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ3216HM380NT
Z
X
R
0
20
40
60
80
100
120
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ3216HM600-T
Z
X
R
0
10
20
30
40
50
60
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ3216HS480NT
Z
X
R
0
20
40
60
80
100
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ3216HS800-T
Z
X
R
0
20
40
60
80
100
120
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ4516HM560NT
Z
X
R
0
20
40
60
80
100
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ4516HS720NT
Z
X
R
0
20
40
60
80
100
120
140
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ4516HS111-T
Z
X
R
chipbeads_char_e-E07R01
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
135
ELECTRICAL CHARACTERISTICS
High impedance type GHz Band
FB MH1608
0
50
100
150
200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL300-T
Z
X
R
0
50
100
150
200
250
300
350
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL600-T
Z
X
R
0
100
200
300
400
500
600
700
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL121-T
Z
X
R
0
10
20
30
40
50
60
70
80
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM470-T
Z
X
R
0
20
40
60
80
100
120
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM600-T
Z
X
R
0
50
100
150
200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM101-T
Z
X
R
0
50
100
150
200
250
300
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM151-T
Z
X
R
0
50
100
150
200
250
300
350
400
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM221-T
Z
X
R
0
100
200
300
400
500
600
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM331-T
Z
X
R
0
100
200
300
400
500
600
700
800
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM471-T
Z
X
R
0
200
400
600
800
1000
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM601-T
Z
X
R
0
200
400
600
800
1000
1200
1400
1600
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM102-T
Z
X
R
0
20
40
60
80
100
120
140
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ4516HL230NT
Z
X
R
0
20
40
60
80
100
120
140
160
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ4516HM900-T
Z
X
R
chipbeads_char_e-E07R01
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
136
ELECTRICAL CHARACTERISTICS
High impedance type
FB MH2012
FB MH2016
FB MH3216 FB MH3225
0
200
400
600
800
1000
1200
1400
1600
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL331-T
Z
X
R
0
200
400
600
800
1000
1200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL221-T
Z
X
R
0
500
1000
1500
2000
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL471-T
Z
X
R
0
500
1000
1500
2000
2500
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL601-T
Z
X
R
0
20
40
60
80
100
120
140
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2012HM800-T
Z
X
R
0
50
100
150
200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2012HM121-T
Z
X
R
0
50
100
150
200
250
300
350
400
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2012HM221-T
Z
X
R
0
100
200
300
400
500
600
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2012HM331-T
Z
X
R
0
50
100
150
200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2016HM121NT
Z
X
R
0
50
100
150
200
250
300
350
400
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2016HM251NT
Z
X
R
0
50
100
150
200
250
300
350
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH3216HM221NT
Z
X
R
0
100
200
300
400
500
600
700
800
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH3216HM501NT
Z
X
R
0
100
200
300
400
500
600
700
800
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH3225HM601NT
Z
X
R
chipbeads_char_e-E07R01
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
137
ELECTRICAL CHARACTERISTICS
FB MH4516
FB MH4525 FB MH4532
High current type
0
200
400
600
800
1000
1200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH3225HM102NT
Z
X
R
0
500
1000
1500
2000
2500
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH3225HM202NT
Z
X
R
0
200
400
600
800
1000
1200
1400
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH4516HM851NT
Z
X
R
0
200
400
600
800
1000
1200
1400
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH4525HM102NT
Z
X
R
0
500
1000
1500
2000
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH4525HM162NT
Z
X
R
0
200
400
600
800
1000
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH4532HM681-T
Z
X
R
0
200
400
600
800
1000
1200
1400
1600
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH4532HM132-T
Z
X
R
0
500
1000
1500
2000
2500
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH4532HM202-T
Z
X
R
0
5
10
15
20
25
30
35
40
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HM180NTR
Z
X
R
0
10
20
30
40
50
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HM230NTR
Z
X
R
0
5
10
15
20
25
30
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HS220NTR
Z
X
R
0
5
10
15
20
25
30
35
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HS280NTR
Z
X
R
chipbeads_char_e-E07R01
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
138
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E05R01
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
PACKAGING
①Minimum Quantity
Type Standard Quantity[pcs]
Paper Tape Embossed Tape
1608(0603) 4000
2125(0805) 4000
2012(0805) 4000
2016(0806) 2000
3216(1206) 2000
3225(1210) 1000
4516(1806) 2000
4525(1810) 1000
4532(1812) 2000
②Tape Material
Card board carrier tape
Top tape
Base tape
Sprocket hole
Bottom tape Chip cavity
Chip
Chip Filled
Embossed tape
Top tape
Base tape
Sprocket hole
Chip cavity
Chip
Chip Filled
③Taping Dimensions
Paper tape (0.315 inches wide)
F
2.0±0.05
(0.079±0.002)
4.0±0.1
(0.157±0.004)
1.75±0.1
(0.069±0.004)
3.5±0.05
(0.138±0.002)
8.0±0.3
(0.315±0.012)
φ1.5+0.1/-0
(φ0.059+0.004/-0)
Sprocket hole
A
B
T
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E05R01
Type Chip Cavity Insertion Pitch Tape Thickness
A B F T
FBMJ1608
FBMH1608
(0603)
1.0±0.2
(0.039±0.008)
1.8±0.2
(0.071±0.008)
4.0±0.2
(0.157±0.008)
1.1max
(0.043max)
FBMJ2125
FBMH2012
(0805)
1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
4.0±0.2
(0.157±0.008)
1.1max
(0.043max)
Unit : mm(inch)
Embossed tape (0.315 inches wide)
F
2.0±0.05
(0.079±0.002)
4.0±0.1
(0.157±0.004)
1.75±0.1
(0.069±0.004)
3.5±0.05
(0.138±0.002)
8.0±0.3
(0.315±0.012)
φ1.5+0.1/-0
(φ0.059+0.004/-0)
Sprocket hole
A
B
Type Chip Cavity Insertion Pitch Tape Thickness
A B F K T
FBMH2016
(0806)
1.8±0.2
(0.071±0.008)
2.2±0.2
(0.087±0.008)
4.0±0.2
(0.157±0.008)
2.6max
(0.102max)
0.6max
(0.024max)
FBMJ3216
(1206)
1.9±0.2
(0.075±0.008)
3.5±0.2
(0.138±0.008)
4.0±0.2
(0.157±0.008)
1.5max
(0.059max)
0.3max
(0.012max)
FBMH3216
(1206)
1.9±0.2
(0.075±0.008)
3.5±0.2
(0.138±0.008)
4.0±0.2
(0.157±0.008)
2.6max
(0.102max)
0.6max
(0.024max)
FBMH3225
(1210)
2.8±0.2
(0.110±0.008)
3.5±0.2
(0.138±0.008)
4.0±0.2
(0.157±0.008)
4.0max
(0.157max)
0.6max
(0.024max)
Unit : mm(inch)
Embossed tape (0.472 inches wide)
F
2.0±0.05
(0.079±0.002)
4.0±0.1
(0.157±0.004)
1.75
0.1
(0.069±0.004)
5.5±0.05
(0.217±0.002)
12.0±0.3
(0.472±0.012)
φ1.
5
0.1/
0
(φ0.059+0.004/-0)
Sprocket hole
A
B
T
K
Type Chip Cavity Insertion Pitch Tape Thickness
A B F K T
FBMJ4516
(1806)
1.9±0.2
(0.075±0.008)
4.9±0.2
(0.193±0.008)
4.0±0.2
(0.157±0.008)
1.5max
(0.059max)
0.3max
(0.012max)
FBMH4516
(1806)
1.9±0.2
(0.075±0.008)
4.9±0.2
(0.193±0.008)
4.0±0.2
(0.157±0.008)
2.6max
(0.102max)
0.6max
(0.024max)
FBMH4525
(1810)
2.9±0.2
(0.114±0.008)
4.9±0.2
(0.193±0.008)
4.0±0.2
(0.157±0.008)
4.0max
(0.157max)
0.6max
(0.024max)
FBMH4532
(1812)
3.6±0.2
(0.142±0.008)
4.9±0.2
(0.193±0.008)
8.0±0.2
(0.315±0.008)
4.0max
(0.157max)
0.6max
(0.024max)
Unit : mm(inch)
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E05R01
④Leader and Blank portion
⑤Reel size
2.0±0.5
(0.079±0.020)
φ21.0±0.8
(φ0.827±0.031)
φ13.0±0.5
(φ0.512±0.020)
R1.0
φd
t
φD
W
Type φD φd W t
FBMJ1608
180+0/-3
(7.09+0/-0.118
60+1/-0
(2.36+0.039/-0
10.0±1.5
(0.394±0.059)
2.5max
(0.098max)
FBMJ2125
FBMJ3216
FBMJ4516 14.0±1.5
(0.551±0.059)
FBMH1608
10.0±1.5
(0.394±0.059)
FBMH2012
FBMH2016
FBMH3216
FBMH3225
FBMH4516 14.0±1.5
(0.551±0.059)
FBMH4525
FBMH4532 330±2.0
(12.99±0.080)
100±1.0
(3.94±0.039)
14.0±2.0
(0.551±0.080)
3.0max
(1.181max)
Unit : mm(inch)
⑥Top tape strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-E04R01
CHIP BEAD INDUCTORS FOR POWER LINE (FB SERIES M TYPE)
RELIABILITY DATA
1. Operating Temperature Range
Specified Value -40℃~+125℃
Including self-generated heat
2. Storage Temperature Range
Specified Value -40℃~+85℃
Test Methods and
Remarks *Note: -5 to +40℃ in taped packaging
3. Impedance
Specified Value Within the specified tolerance
Test Methods and
Remarks
Measuring equipment : Impedance analyzer (HP4291A) or its equivalent
Measuring frequency : 100±1 MHz
4. DC Resistance
Specified Value Within the specified range
Test Methods and
Remarks
Four-terminal method
Measuring equipment : Milliohm High-Tester 3226 (Hioki Denki) or its equivalent
5. Rated Current
Specified Value Within the specified range
6. Vibration
Specified Value Appearance : No significant abnormality
Impedance change : Within ±30% of the initial value
Test Methods and
Remarks
According to JIS C60068-2-6.
Vibration type : A
Time : 2 hrs each in X,Y, and Z directions Total: 6 hrs
Frequency range : 10 to 55 to 10Hz (/min.)
Amplitude : 1.5 mm (shall not exceed acceleration 196m/s2)
Mounting method : Soldering onto PC board
7. Solderability
Specified Value 90% or more of immersed surface of terminal electrode shall be covered with fresh solder.
Test Methods and
Remarks
Solder temperature : 230±5℃
Immersion time : 4±1 sec.
Preconditioning : Immersion into flux.
Immersion and Removal speed : 25mm/sec.
8. Resistance to Soldering Heat
Specified Value Appearance : No significant abnormality
Impedance change : Within ±30% of the initial value
Test Methods and
Remarks
Preheating : 150℃ for 3 min.
Resistance to Soldering Heat : 260±5℃
Duration : 10±0.5 sec.
Preconditioning : Immersion into flux.
Immersion and Removal speed : 25mm/sec.
Recovery : 2 to 3 hrs of recovery under the standard condition after the test.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-E04R01
9. Thermal Shock
Specified Value Appearance : No significant abnormality
Impedance change : Within+50/-10% of the initial value
Test Methods and
Remarks
According to JIS C60068-2-14.
Conditions for 1 cycle
Step Temperature (℃) Duration (min.)
1 -40±3℃ 30±3
2 Room Temperature Within 3
3 85±2℃ 30±3
4 Room Temperature Within 3
Number of cycles : 100
Mounting method : Soldering onto PC board
Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
10. Resistance to Humidity (steady state)
Specified Value Appearances : No significant abnormality
Impedance change : Within ±30% of the initial value
Test Methods and
Remarks
Temperature : 40±2℃
Humidity : 90 to 95% RH
Duration : 500+24/-0
Mounting method : Soldering onto PC board
Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
11. Loading under Damp Heat
Specified Value Appearance No significant abnormality
Impedance change Within ±30% of the initial value
Test Methods and
Remarks
Temperature : 40±2℃
Humidity : 90 to 95%RH
Applied current : Rated current
Duration : 500+24/-0 hrs
Mounting method : Soldering onto PC board
Recovery : 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
12. High Temperature Loading Test
Specified Value Appearance : No significant abnormality
Impedance change : Within ±30% of the initial value
Test Methods and
Remarks
Temperature : 85±2℃
Duration : 500+24/-0 hrs
Applied current : Rated current
Mounting method : Soldering onto PC board
Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
13. Bending Strength
Specified Value Appearance : No mechanical damage.
Test Methods and
Remarks
Warp : 2mm
Testing board : Glass epoxy-resin substrate
Thickness : 0.8mm
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-E04R01
14. Adhesion of Electrode
Specified Value No separation or indication of separation of electrode.
Test Methods and
Remarks
Applied force : 5N
Duration : 10 sec.
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity and 86 to 106kPa of air
pressure. Unless otherwise specified, all the tests are conducted under the "standard condition."
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_prec_e-E05R01
CHIP BEAD INDUCTORS FOR POWER LINE (FB SERIES M TYPE)
PRECAUTIONS
1. Circuit Design
Precautions
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment, (office supply equipment,
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
◆Rated current
1. Rated current of this product is shown in this catalogue, but please be sure to have the base board designed with adequate inspection in
case of the generation of heat becomes high within the rated current range when the base board is in high resistance or in bad heating
conditions.
2. PCB Design
Precautions ◆Land pattern design
1. Please refer to a recommended land pattern.
3. Considerations for automatic placement
Precautions
◆Adjustment of mounting machine
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
considerations
◆Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
Precautions
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, etc. sufficiently.
◆Preheating when soldering
Heating : The temperature difference between soldering and remaining heat should not be greater than 150℃.
Cooling : The temperature difference between the components and cleaning process should not be greater than 100℃.
◆Recommended conditions for using a soldering iron
Put the soldering iron on the land-pattern.
Soldering iron's temperature - Below 350℃
Duration - 3 seconds or less
The soldering iron should not directly touch the inductor.
Technical
considerations
◆Wave, Reflow, Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
【Recommended reflow condition】
◆Preheating when soldering
1. There is a case that products get damaged by a heat shock.
◆Recommended conditions for using a soldering iron
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_prec_e-E05R01
5. Handling
Precautions
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Setting PC boards
1. When setting a chip mounted base board, please make sure that there is no residual stress to the chip by distortion in the board or at
screw part.
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the
board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
Technical
considerations
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Setting PC boards
1. There is a case that a characteristic varies with residual stress.
◆Breakaway PC boards (splitting along perforations)
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
6. Storage conditions
Precautions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
・Recommended conditions
Ambient temperature -5~40℃
Humidity Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, inductors should be used within 6 months from the time of delivery.
Technical
considerations
◆Storage
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.

Products

FERRITE BEAD 25 OHM 0805 1LN
Available Quantity279643
Unit Price0.09
FERRITE BEAD 42 OHM 0805 1LN
Available Quantity183652
Unit Price0.09
FERRITE BEAD 48 OHM 1206 1LN
Available Quantity271307
Unit Price0.14
FERRITE BEAD 80 OHM 1206 1LN
Available Quantity145161
Unit Price0.14
FERRITE BEAD 120 OHM 0806 1LN
Available Quantity101844
Unit Price0.14
FERRITE BEAD 1 KOHM 0603 1LN
Available Quantity393434
Unit Price0.14
FERRITE BEAD 100 OHM 0603 1LN
Available Quantity242692
Unit Price0.14
FERRITE BEAD 600 OHM 0603 1LN
Available Quantity154437
Unit Price0.14
FERRITE BEAD 47 OHM 0603 1LN
Available Quantity78944
Unit Price0.14
FERRITE BEAD 220 OHM 1206 1LN
Available Quantity204976
Unit Price0.19
FERRITE BEAD 500 OHM 1206 1LN
Available Quantity55218
Unit Price0.19
FERRITE BEAD 600 OHM 1210 1LN
Available Quantity140108
Unit Price0.32
FERRITE BEAD 1 KOHM 1210 1LN
Available Quantity85070
Unit Price0.32
FERRITE BEAD 850 OHM 1806 1LN
Available Quantity55623
Unit Price0.34
FERRITE BEAD 2 KOHM 1210 1LN
Available Quantity22539
Unit Price0.32
FERRITE BEAD 1.3 KOHM 1812 1LN
Available Quantity169762
Unit Price0.46
FERRITE BEAD 680 OHM 1812 1LN
Available Quantity90757
Unit Price0.46
FERRITE BEAD 1 KOHM 1810 1LN
Available Quantity34693
Unit Price0.51
FERRITE BEAD 1.6 KOHM 1810 1LN
Available Quantity31597
Unit Price0.51
FERRITE BEAD 22 OHM 0603 1LN
Available Quantity50986
Unit Price0.1